UK24BAC
Belimo Gateway MP to BACnet MS/TP
www.belimo.com
UK24BAC • en • v1.9 • 06.2018 • Subject to changes
11 / 20
Protocol Implementation Conformance Statement - PICS
General information
Date:
3. February 2014
Vendor Name:
BELIMO Automation AG
Vendor ID:
423
Product Name:
UK24BAC
Product Model Number:
N/A
Applications Software Version:
1.10
Firmware Revision:
1.10
BACnet Protocol Revision:
1.10
Product Description:
The UK24BAC device is a gateway from MP to BACnet MS/TP. Up to eight MP-bus-capable
Belimo actuators can be connected on the MP-Bus side. This permits the actuator functions as
well as the connected sensors to be integrated directly into BACnet.
The datapoint mapping from MP to BACnet is fix defined. The configuration of the device is
accomplished with DIP switches and with Standard BACnet clients.
BACnet Standard Device Profile:
BACnet Application Specific Controller (B-ASC)
BACnet Interoperability Building Blocks supported:
Data Sharing - ReadProperty-B (DS-RP-B)
Data Sharing - ReadPropertyMultiple-B (DS-RPM-B)
Data Sharing - WriteProperty-B (DS-WP-B)
Data Sharing - WritePropertyMultiple-B (DS-WPM-B)
Data Sharing - COV-Unsolicited-B (DS-COVU-B)
Device Management - DynamicDeviceBinding-B (DM-DDB-B)
Device Management - DynamicObjectBinding-B (DM-DOB-B)
Device Management - DeviceCommunicationControl-B (DM-DCC-B)
Segmentation Capability:
No
Data Link Layer Options:
MS/TP master,
baud rates: 9'600, 19'200, 38'400, 76'800
Device Address Binding:
No static device binding supported
Networking Options:
None
Character Sets Supported:
ANSI X3.4 / UTF-8
Standard objects (general)
These BACnet objects exist only once per device:
Datapoint
BACnet Object
-- Device
Device [x]
-- Device ID Offset
AV
[1]
-- COV Mode
MV
[1]
The Device Object Identifier (Device-ID) is defined by the BACnet MAC address (TS) and
the Device ID Offset: Device-ID=TS+Offset.
The Device Object Name is defined by the Product Name and the Device-ID:
e.g. "UK24BAC_1001"
The calculated value can be overwritten using WriteProperty services. Reset to
automatically calculation by writing an empty object name (empty or space character only).
Summary of Contents for UK24BAC
Page 20: ......
