https://belifu.com/warranty [email protected]
6
1. Disconnect the power cord from the electrical outlet.
2. Disconnect the heating Pad with the Control Connector, through pulling the Control
Connector from the Pad connector.
3. The Pad without Controller can be washed by washing machine or hand, using a mild
detergent, cool water, and a gentle cycle.
4. Dry with a rope or lay the pad flat to dry, or tumbled dry on low heat.
5. Make sure the product is completely dry before the next use, especially the connector of
the pad should be totally dry.
6. To store the product, please loosely roll the Heating Pad together, loop the cord over the
rolled ends, and then store it in a cool, dry, dark location after each use. Avoid sharply folding
the Heating Pad.
ELECTRICAL SPECIFICATIONS
Voltage
Frequency
Wattage
Amperage
120 VAC
60 Hz
85W
0.7A
FREQUENTLY ASKED QUESTIONS
1.
Does it have even heat on both sides? Or one side more than the other?
Both sides of the heating pad heat evenly. There is a plush side and a standard cloth side.
One side is plush and soft and more comfortable for direct skin contact, but either side
will work. The non
-
plush side has written safety and washing instructions. You could use
the standard side against a shirt or towel. It does transfer a bit more heat than the plush
side.
2.
Does the cover remove for washing?
This heating pad does not have a removable cover. The Washing instructions are
included in the booklet you get, please read carefully before washing. It is better to sew
one or modify a pillow case if you want the feel of cotton and reduce how often you
would wash the heating pad.
3.
What temperature does this product reach?
Maximum temperature does not exceed the Underwriters Laboratories temperature
limit of 176 °F (80 °C), when set to “Hi”. Temperature varies by heat setting; you can use
a lower heat setting, but depending on the specific application and your personal
preference.
4.
How much time does it take to warm up to each temperature?
