BELGACOM Twist 619, User Manual

Page: 15 / 67

13
Getting started
3 Getting started
3.1 Connect the base station
1
Place the base station in a central
location near the telephone line
socket and electricity socket.
2
Connect the line cord and the
power cable to their corresponding
connectors at the back of the base
station.
3
Connect the other end of the line
cord and power cable to their
respective sockets
.
Avoid placing the base station too close
to large metal objects such as filing
cabinets, radiators or electrical
appliances. This can impair the range and
sound quality. Buildings with thick
internal and external walls may impair
transmission of signals to and from the
base.
Power is applied when the power
adaptor is plugged into the unit and
connected to the electricity socket. The
only way to power down the unit is to
unplug the power adaptor from the
electricity socket. Therefore, ensure that
the electricity socket is easily accessible.
The power adaptor and telephone line
cord have to be connected correctly, as
incorrect connection could damage the
unit. Always use the telephone line cord
supplied with the unit. Otherwise, you
may not get a dial tone.
3.2 Wall mounting the base
The base is designed to support wall
mounting. To wall mount the base, follow
the instructions below.
1
Remove the bracket from the back
of the base station by
➀
pressing
the two latches on the inside of the
bracket and
➁
rotating the bracket
outward.
Warning
Warning