BELGACOM Twist 398, User Manual

Page: 18 / 56

16 Advanced features
Enter the flash duration index number (see
below).
Press and hold
until you see the new
setting is displayed.
5.3.7 Select pause duration
You should not need to change the preset value
of pause duration.
In standby mode :
Press and hold until you see MENU? .
Enter the pause duration index number (see
below).
Press and hold
until you see the new
setting is displayed.
5.3.8 Message waiting indication (new
message - PhoneMail)
The icon will be on when you have a new
message in your mailbox. The LED on base
station will blink.
After you've listened to all the new messages,
will turn off. The LED on base station will
stop blinking.
Note
You may also see PHONEMAIL shown on the
display if you have new message in your mailbox,
but it will disappear after you make an outgoing
call.
5.3.9 Paging handset
You can use this feature to locate the handsets.
In standby mode, press
on the base.
• All handsets registered to the base will produce
the paging tone for 30 seconds and the screen
displays
PAGING... .
Note
You can stop the paging by pressing any key on
each handset or pressing
on the base again.
Flash duration Index Number
FLASH 1 120 ms 71
FLASH 2 270 ms 72
Pause duration Index Number
PAUSE 1 3 s 78
PAUSE 2 4 s 79
2
3
1
2
3
Twist398_EN_Belgacom.book Seite 16 Montag, 6. August 2007 11:36 11