29
Advanced settings
procedure will be aborted. If this
happens, repeat Step 1.
2
On the handset, press
m
, scroll
n
to
ADVANCED SET
and press
o
, scroll
n
to
REGISTER
and
press
o
.
3
Enter the PIN when prompted and
press
o
to confirm.
By default, the PIN is 0000.
4
SEARCHING
is displayed on the
screen.
• Upon successful registration, a
validation tone is emitted and the
handset numbers (1 to 5) will be
assigned by the base
automatically.
7.3
Unregister
1
Press
m
in idle mode, scroll
n
to
ADVANCED SET
and press
o
,
scroll
n
to
UNREGISTER
and
press
o
.
2
Enter the PIN when prompted and
press
o
to confirm.
By default, the PIN is 0000.
3
Scroll
n
to select the handset
number to unregister and press
o
.
• A validation tone is emitted to
indicate successful unregistration
and the screen shows
UNREGISTERED
.
If no action is taken on the handset
within 15 seconds, the unregistration
procedure will be aborted and the
handset returns to idle mode.
A registered handset other than one of
the model described in this manual can
only be unregistered using a handset
described in this manual.
7.4
Reset Unit
You can reset your phone to its default
settings with this feature.
Upon reset, all your personal settings,
call log and redial list entries will be
deleted and the phone will return to its
default settings. However, your
phonebook as well as the unread
messages of your answering machine will
remain unchanged after reset.
You may have to configure your phone
once again.
1
Press
m
in idle mode, scroll
n
to
ADVANCED SET
and press
o
,
scroll
n
to
RESET
and press
o
.
2
CONFIRM?
is displayed on the
screen.
3
Press
o
again to confirm.
• A validation tone is emitted.
• The unit is reset to its default
settings. (See “Default settings”
on page 30)
7.5
Change Flash time
Flash time (or dial delay) is the time delay
by which the line will be disconnected
after you press
t
key. It can be set to
short or long.
Note
Note
Note
Warning
Note
