7
User manuali MAESTRO 1060
2
CUSTOMISATION
PROGRAMMING
The settings procedures can be done at line engaged.
If the procedure is correct, the loudspeaker will emit 1 beep (3 beeps in case
of error). At the end of the procedure the line should be released.
2.1 Setting the ringer
2.1.1 Setting the ringer melody
IIt is possible to choose between 4 different melodies as follows:
°
Press the
∂
key
°
Press the
" # "
key
°
Enter the number of the desired melody (from 1 to 4)
°
Press the
∂
key to confirm
2.1.2 Setting the ringer volume
It is possible to choose the ringer volume between 4 different volum levels :
ringer off (0), minimum level (1), medium level (2), maximum level (3).
Proceed as follows:
°
Press the
∂
key
°
Press the
≤
key
°
Enter the number of the desired level (from 0 to 3)
°
Press the
∂
key to confirm.
2.2 Setting the loudspeaker volume
If the loudspeaker has been activated, it is possible to adjust its volume between 4 different levels
by pressing the
≤
key.
The level changes each time the key is pressed passing from the minimum to maximum
and then to the minimum again.
The level stored is the one audible when the line is goig to be released.
