BELGACOM Maestro 1045, User Manual

Page: 8 / 21

7
Guide the cords through the cord guides at the bottom
of the telephone base .
4 Plug the 5-pin plug into the telephone socket .
5 Pick up the receiver and check for a dialling tone .
> The telephone is now ready for use .
Mounting the telephone on the wall
Use a screwdriver to turn the suspension clip in the
receiver holder on the telephone base . This will make
part of the clip stick out (picture ) . The receiver will be
suspended from the clip .
Picture : turn suspension clip
2 On the wall, mark 2 screw holes beneath each other .
Use the drawing for wall mounting on page 9 if so
required . Now drill 2 holes, each with a diameter of
6 mm . The distance between the 2 screw holes is
00 mm .
Stick wall plugs into the holes and turn the screws into
the plugs until the screws stick out by about 5 mm .
4 Remove the suspension section from the bottom of the
telephone base: use both thumbs to push in points
and
, while at the same time sliding the section
downwards with your index finger(s) (picture 2) .