6
en
Maestro 1002 / BelgaCom en/ A30054-M6527-E151-1-3Q19 / DA210_en.fm / 03.04.2012
Operation on public
telephone systems
Your Maestro 1002 allows you to use
the smart services of Belgacom (for
example call divert). You can save the
service key combinations to your
speed dial keys just like a normal
number.
Recall key
In public telephone systems, the
recall key is required to use certain
additional services; e.g. for "Call back
on busy".
It is not necessary to change the dial-
ling mode or to adjust the flash time
of your telephone. The default set-
ting is T1 which is described on
(
Appendix
Care
Wipe the unit with a
damp cloth
or
an
antistatic cloth
. Do not use sol-
vents or microfibre cloths.
Never
use a dry cloth; this can cause
static.
Contact with liquid
If the device comes into contact with
liquid:
1
Allow the liquid to drain from the
device.
2
Pat all parts dry. Place the device
(the keypad facing down) in a
dry, warm place
for at least 72
hours
(
not
in a microwave, oven
etc.).
3
Do not switch on the device
again until it is completely dry.
When it has fully dried out, you will
normally be able to use it again.
In rare cases, contact with chemical
substances can cause changes to the
telephone's exterior. Due to the wide
variety of chemical products availa-
ble on the market, it was not possible
to test all substances.
Questions and answers
You lift the handset but you hear
no dialling tone:
Is the connecting
lead correctly plugged into the tele-
phone and the telephone socket?
The dialling tone is audible but the
telephone will not dial:
The con-
nection is OK. Is the dialling mode set
correctly?
The other party cannot hear you:
Mute activated?
Environment
u
The equipment that you bought
has required the extraction and
use of natural resources for its
production. It may content haz-
ardous substances for the health
and the environment.
u
In order to avoid the dissemina-
tion of those substances in our
environment and to diminish the
pressure on the natural
resources, we encourage you to
use the appropriate take-back
systems. Those systems will
reuse or recycle most of the
materials of your end life equip-
ment in a sound way.
u
The crossed-bin symbol invites
you to use those systems.
u
If you need more information on
the collection, reuse and recy-
cling systems, please contact
your local or regional waste
administration.
u
You can also contact us for more
information on the environmen-
tal performances of our prod-
ucts.
!
