22
5. New Contact
You can add a private call contact to the contact list. When edit name, press[
*
]
key to delete, press [#] to switch input method, name input 16 characters at
most; then input number, the available number range is 1~16776415. After
add a private call contact successfully, on contacts list will show new contact.
Scan
1. Scan On/Off
While current channel add scan list and the list contain 2 channels at least,
you may enable the feature. Your radio cycles through the programmed scan
list for the current channel looking for voice activity (Analog and digital
channel are supported). The LED blinks red during scanning, and will stop on
a channel where activity is detected. If you don’t want to receive calls on the
channel, press the programmed [Nuisance Delete] key to temporarily remove
the unwanted channel from the scan list. To exit scanning process, you can
turn off in scan menu, switch channel or press the programmed [Scan On/Off]
key.
Note:
If the channel enables the feature “Auto Scan” via the programming software, switch to
the channel will enter scanning automatically;
While programmable key as Scan on/off, press it to enable scan feature.
