Settings
1.
Settings
Allow a user to perform basic settings for the radio.
●
Talk Around: When your repeater malfunctions, or when radio is out of repeater
’
s range,
you can continue to communicate in talk around mode. While enable talk around feature, the
screen displays: ，By this time TX frequency the same as to RX frequency. If switch
channel，enable scan feature or restart radio will disable the feature.
Note：
To enable this function, TX frequency should be different from RX frequency, and the channel will
set as allow talk around on the programming software.
Press the programmed Talk Around key to switch DM mode and RM mode.
Tone/Alerts: To set tones for your radio, tone alerts include settings of all tones, call alert
tone, message tone and keypad tone. If disable all tones, all alerts will be off except
emergency tone.
TX Power: Allow a user to change the power level, there are two levels available: high
(indicated by H) and lower (indicated by L).
Backlight: To set the backlight parameters, you can select on or automatic, while you
select automatic on, the light will become dark after 5 second you don't operate the key,
and the light will keep on all the time when the backlight is on.
Boot Interface: Allow a user to enable or disable the boot screen via menu. If the Intro
screen is enabled, while the radio power on, the screen display BF Logo and device
name; while the Intro screen is disable, the screen only displays device name.
Keypad Lock: Allow a user to enable or disable keypad lock via menu. While Keypad
locked indicate:
，that you can
’
t operate the keypad except PTT key and orange
button, button 1 or button 2. Press
“
MENU
”
and
”
#
”
key to unlock.
LED indicator: To set whether to enable LED indication via menu. While disable all
indicator, the screen becomes dark and TX red indicator, Rx green indicator, scan orange
