29
Lowery Battery Alert
When your battery gets low, LED indicator glows red and with a warning tone:
“Please Charge”，please replace the battery or charge the battery in time. The
radio will turn off automatically while battery is too low.
Via programmable software to set it: General Setting folder → Tone Alerts →
RX low battery interval (sec)
CTCSS/CDCSS
On analog channel and digital analog compatible channel, you can set unique
CTCSS/CDCSS to guarantee the privacy of your communication, on digital
compatible analog or analog compatible digital channel there must have a
CTCSS/CDCSS. If CTCSS/CDCSS has been set on the current channel,
CTCSS/CDCSS match is required for the radio to receive an incoming signal.
You can select a CTCSS/CDCSS from CTCSS frequency table or CDCSS
code table, or input non-standard CTCSS/CDCSS manually.
Via programmable software to set it: Channels folder→ Zone→ An analog
channel→ TX Parameters to select encode→ RX Parameters to select decode
●Decode: Only when receiver receives a call containing matching the decode,
you can hear the call;
●Encode: Signal that you transmit will only be heard by parties whose
CTCSS/CDCSS signaling matches your radio’s.
Note： The radio approve of non-standard code, on analog mode, you can input
