41
Densité 3+ FR1
User Manual
• Hovering the cursor over the Reference Status icon will show the format of the
input reference
2 Tabs are provided to give access to the various controls.
• Single row of tabs, with arrow buttons to move along until desired tab is displayed.
Click on a tab to select it.
3 The contents of the selected tab, with operating controls and status monitors as
required.
4 The
Load Factory
button.
Clicking this button will reset all REF-1801-FR1 parameters to factory-default values
(shown underlined in the
, on page 39), overriding settings made
in the control panels.
Input tab
Click the Input tab.
Fig. 4-7: Input tab
Icon # Indicates
Appearance
Interpretation
1
Card control
status
Green if the card is controlled remotely.
Yellow when locally controlled.
2
Input reference
status
Green if OK.
Red if error detected.
3
Output 1
Always grey - no SPG option in the REF-
1801-FR1
4
Output 2
Always grey - no SPG option in the REF-
1801-FR1
