40
REF-1801-FR1 Frame Reference
The iControl graphic interface window
• Please consult the iControl User’s Guide for information about setting up and operating
iControl.
In iControl Navigator or iControl Websites, double-click on the REF-1801-FR1 icon to open
the control panel.
NOTE:
REF-1801 is the “short label” for a REF-1801-FR1 inside iControl.
The iControl graphic interface window
The basic window structure for the REF-1801 is shown in figure 3. The window
identification line at the top gives the card type (
REF-1801
), and the slot number in which
the card is installed in the Densité frame. On the left is a Status icon for the card.
Fig. 4-6: REF-1801-FR1 iControl graphic interface window
There are four main sections in the window itself, identified in Figure 4-6:
1 The top section displays four status icons on the left. These icons report card
communication status and input reference signal format and status.
1
2
3
4
Move the cursor over an icon to see its current status in the message area below the
icons. If there is an error status, the message will appear automatically. If there are
multiple error messages, the display will cycle through them