13
CPU-ETH2 Controller Card
Chapter 3 describes the installation and functionality of the CPU-ETH2 Controller card in
the Densité 3+ FR1 housing frame.
Summary
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Control Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Configuring the CPU-ETH2 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Local Control Panel Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Overview
The CPU-ETH2 Controller installed in the Densité 3+ FR1 frame supports all on-frame
communication between cards, and incorporates a front control panel for local control and
adjustment of the frame and installed cards. The CPU-ETH2 Controller serves as the
communications port for control and alarm information entering and leaving the frame.
The CPU-ETH2 controller features two Ethernet ports for system-wide monitoring and
control of the frame, using Miranda’s control solutions or a third party monitoring system.
This controller card is compatible with the TCP/IP protocol and can support polling or
report on error modes (unsolicited messaging).
Features
• Dual Ethernet RJ-45 ports (10/100Base-T) - the two ports can be configured
independently for full network redundancy
• In addition to static IP address configuration , each port allows DHCP dynamic
addressing
