2.1 Intended use
2 Safety instructions
2 Safety instructions
2.1 Intended use
The devices described in this manual are decentralized input/output
assemblies on a PROFINET IO network.
We adhere to all safety standards when developing, producing, testing, and
documenting our products. When you adhere to the handling specifications
and safety instructions described for the configuration, assembly, and correct
operation, there should not normally be any risks for people or equipment.
The modules fulfill the requirements of the EMC guidelines (89/336/EEC,
93/68/EEC and 93/44/EEC) and the low voltage guideline (73/23/EEC).
The modules are designed to be used in the industrial sector. The industrial
environment is distinguished by the fact that the consumer is not connected
directly to the public low voltage network. Additional measures are required
for use in residential areas or in business and commercial sectors.
Attention:
This equipment may cause radio interference in residential
areas. In this case the operator may be requested to carry out
appropriate measures.
The proper and safe operation of this product depends on proper
transportation, storage, assembly, and installation, and careful operation.
A completely assembled device housing is required for the proper operation of
the modules. Only connect devices to the modules that fulfill the requirements
of EN 61558-2-4 and EN 61558-2-6.
During the configuration, installation, start-up, maintenance, and testing of
the devices, adhere to the safety and accident-prevention guidelines for the
specific application.
Only install cables and accessories that fulfill the requirements and
regulations for safety, electromagnetic compatibility, and, where applicable,
telecommunication end devices, as well as the specification information.
Manual LioN-P PROFINET IO-Link Master
Version 2.1 10/2017
8
