Safety instructions
Technical manual LioN-P EtherCAT® Digital-I/O
Release 1.0 11/2016
2.2 Qualified personnel
9
Only install cables and accessories that fulfill the requirements and
regulations for safety, electromagnetic compatibility, and, where applicable,
telecommunication end devices, as well as the specification information.
Information on which cables and accessories are permitted for the
installation can be obtained from Lumberg Automation™ or is contained in
this manual.
2.2
Qualified personnel
The configuration, installation, start-up, maintenance, and testing of the
devices may only be performed by a qualified electrician who is familiar with
the safety standards of the automation technology.
The personnel requirements are based on the requirement profiles described
by ZVEI, VDMA, or equivalent organizations.
Only electricians who are familiar with the content of this manual are
authorized to install and maintain the devices described. These are persons
who
based on their technical training, knowledge, and experience, and their
knowledge of the pertinent standards, can evaluate the work to be carried
out and identify any potential risks or
based on working for several years in a related sector, have the same
level of knowledge as they would have from the relevant technical
training.
Only Belden Deutschland GmbH – Lumberg Automation™ – is permitted to
make changes to the hardware or software of the products that go beyond
the scope of this manual.
WARNING
Making unqualified changes to the hardware or software, or non-adherence
to the warning information contained in this manual, can result in serious
personal injury or damage to equipment.
