Belden HIRSCHMANN RSR20 Series, Installation Manual

Page: 39 / 66

Installation RSR20/RSR30
Release 06 07/2021
39
2 Installation
The devices have been developed for practical application in a harsh
industrial environment.
On delivery, the device is ready for operation.
Perform the following steps to install and configure the device:

Checking the package contents
 Installing and grounding the device
 Installing an SFP transceiver (optional)
 Connecting the terminal block

Mounting the terminal block

Operating the device
 Connecting data cables
 Filling out the inscription label
2.1 Checking the package contents
Proceed as follows:

Check whether the package includes all items named in the section
“Scope of delivery” on page 61 .

Check the individual parts for transport damage.
2.2 Installing and grounding the device
2.2.1 Installing the device onto the DIN rail
Verify that the device maintains the minimum clearance to meet the climatic
conditions during operation:
 Top and bottom device side: 3.94 in (10 cm)

Left and right device side: 0.79 in (2 cm)
WARNING
FIRE HAZARD
Install the device in a fire enclosure according to EN 60950-1.
Failure to follow this instruction can result in death, serious injury, or
equipment damage.