Configuration
4.10 IPsec Tunnel Configuration
We recommend that you maintain the default settings. When you set key exchange times
higher, the tunnel produces lower operating costs, but the setting also provides less security.
Conversely, when you reducing the time, the tunnel produces higher operating costs, but pro-
vides for higher security.
The changes in settings will apply after clicking the
Apply
button.
4.10.1 Example of the IPSec Tunnel Configuration in IPv4 Network
Figure 38: Topology of IPsec Configuration Example
IPsec tunnel configuration:
Configuration
A
B
Host IP Mode
IPv4
IPv4
Remote IP Address
10.0.0.2
10.0.0.1
Tunnel IP Mode
IPv4
IPv4
Remote Subnet
192.168.2.0
192.168.1.0
Remote Subnet Mask
255.255.255.0
255.255.255.0
Local Subnet
192.168.1.0
192.168.2.0
Local Subnet Mas:
255.255.255.0
255.255.255.0
Authenticate mode
pre-shared key
pre-shared key
Pre-shared key
test
test
Table 36: Example IPsec configuration
Examples of different options for configuration and authentication of IPsec tunnel can be found
in the "IPsec Tunnel" application note. You can download the PDF on the Internet at:
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
81
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
