Configuration
4.6 Static Routes
4.6 Static Routes
Static routes can be specified on the
Static Routes
configuration page. A static route provide
fixed routing path through the network. It is manually configured on the router and must be
updated if the network topology was changed recently. Static routes are private routers un-
less they are redistributed by a routing protocol. Static routes configuration form is shown on
Figure
Figure 26: Static Routes Configuration
The description of all items is listed in Table
Item
Description
Enable IPv4 (IPv6)
static routes
If checked, static routing functionality is enabled. Active are only
routes enabled by the checkbox in the first column of the table.
Destination Network
The destination IP address of the remote network or host to which
you want to assign a static route.
Mask or Prefix
Length
The subnet mask of the remote network or host IP address.
Gateway
IP address of the gateway device that allows for contact between
the router and the remote network or host.
Metric
Metric definition, means number rating of the priority for the route
in the routing table. Routes with lower metrics have higher priority.
Interface
Select an interface the remote network or host is on.
Table 27: Static Routes configuration
58
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019
Summary of Contents for Hirschmann OWL LTE M12
Page 153: ......
