Belden Hirschmann OWL LTE M12, User Manual

Page: 101 / 153

Configuration 4.14 Services
Remote Control via SMS
After you enter a phone number in the Phone Number 1 field, the router allows you to config-
ure the control of the device using an SMS message. You can configure up to three numbers
for incoming SMS messages. To enable the function, mark the
Enable remote control via SMS
check box. The default setting of the remote control function is active.
Item Description
Phone Number 1 Specifies the first phone number allowed to access the router us-
ing an SMS.
Phone Number 2 Specifies the second phone number allowed to access the router
using an SMS.
Phone Number 3 Specifies the third phone number allowed to access the router
using an SMS.
Table 51: Control via SMS
• If you leave the phone number field blank, then you can still restart the router using
an SMS Reboot message from any phone number.
• If you enter one or more phone numbers, then you can control the router using SMS
messages sent only from the specified phone numbers.
•
If you enter the wild card character
∗
, then you can control the router using SMS
messages sent from any phone number.
Most of the control SMS messages do not change the router configuration. For example, if
the router is changed to the off line mode using an SMS message, the router remains in this
mode, but it will return back to the on-line mode after reboot. The only exception is
set profile
command that changes the configuration permanently, see the table below.
To control the router using an SMS, send only message text containing the control command.
You can send control SMS messages in the following form:
SMS Description
go online sim 1 The router changes to SIM1
go online sim 2 The router changes to SIM2
go online Changes the router to the online mode
go offline Changes the router to the off line mode
set out0=0 Sets the binary output to 0
set out0=1 Sets the binary output to 1
set profile std Sets the standard profile. This change is permanent.
set profile alt1 Sets the alternative profile 1. This change is permanent.
set profile alt2 Sets the alternative profile 2. This change is permanent.
set profile alt3 Sets the alternative profile 3. This change is permanent.
Continued on next page
100
UM Configuration OWL LTE M12
Rel. 06.1.09 - 07/2019