Belden HIRSCHMANN HiOS-2A User Manual Download Page 57

Page: 57 / 66

Index

UM Security BRS-2A

Release

8.7

05/2022

Data connections (installation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Data link redundancy requirements (installation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Decommissioning

Destruction of confidential data and secrets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Reset to the delivery state . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Secure physical destruction of device and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Decommissioning (overview) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Dedicated HTTPS certificate (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Dedicated login banners (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Dedicated SNMPv3 authentication and encryption password policy (configuration) . . . . . . . . . 35

Dedicated SSH host key pair (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Dedicated user account login policy (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Dedicated user account password policy (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Dedicated user accounts and roles for device management (configuration) . . . . . . . . . . . . . . . 34

Defense in depth (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Defense in depth (system planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Defense in depth (system planning), responsibilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Defense in depth example (planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Defense in depth vs. hardening (planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Denial of Service (DoS) protection (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Destruction of confidential data and secrets (decommissioning) . . . . . . . . . . . . . . . . . . . . . . . . 42

Device and port LEDs (planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Device availability (planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Device availability requirements (installation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Device installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Device security (main chapter) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Digital Input (planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Digital Input considerations (installation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Disable automatic device software update from external memory (configuration) . . . . . . . . . . . 31

Disable booting from an external memory (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Disable GMRP and MMRP (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Disable GVRP and MVRP (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Disable insecure management protocols (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Disable loading configuration profile from external memory (configuration) . . . . . . . . . . . . . . . . 31

Disable loading configuration profile without valid fingerprint (configuration) . . . . . . . . . . . . . . . 32

Disable logical access to Digital Input (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Disable logical access to Signal Contact (configuration) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Disable logical access to unused ports and SFP slots (configuration) . . . . . . . . . . . . . . . . . . . . 30

Disable MMRP and GMRP (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Disable MVRP and GVRP (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Disable writing unencrypted configuration profile to external memory (configuration) . . . . . . . . 31

Document history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Document outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Environmental conditions (operation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Example of defense in depth (planning) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Functionality vs. security (device security) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Summary of Contents for HIRSCHMANN HiOS-2A



































































Search results

Summary of Contents for HIRSCHMANN HiOS-2A

Reviews:

Related manuals for HIRSCHMANN HiOS-2A

Brands by name

Popular brands

Belden HIRSCHMANN HiOS-2A, User Manual

Search results

Summary of Contents for HIRSCHMANN HiOS-2A

Reviews:

Related manuals for HIRSCHMANN HiOS-2A

Brands by name

Popular brands