Belden HIRSCHMANN GREYHOUND GRM Series Page 50 User Manual Download

Page: 50 / 80

Installation GRS1020/1120/1030/1130

Release 04 01/2020

2.5

Connecting the terminal blocks

Note:

The supply voltage is connected to the device casing through

protective elements exclusively.

2.5.1

Supply voltage with characteristic value C

You will find information on the characteristic values here:

“Device name and product code” on page 21

You have the option of supplying the supply voltage redundantly, without
load distribution.
Both supply voltage inputs are uncoupled.

Figure 6: Supply voltage with characteristic value C: 2-pin terminal block with screw

lock

WARNING

ELECTRIC SHOCK

Connect only a supply voltage that corresponds to the type plate of your
device.

Failure to follow these instructions can result in death, serious injury,
or equipment damage.

WARNING

ELECTRIC SHOCK

Never insert pointed objects (narrow screwdrivers, wires, etc.) into the
device or into the connection terminals for electric conductors.
Do not touch the connection terminals.

Failure to follow these instructions can result in death, serious injury,
or equipment damage.

−

Summary of Contents for HIRSCHMANN GREYHOUND GRM Series

















































































Search results

Summary of Contents for HIRSCHMANN GREYHOUND GRM Series

Reviews:

Related manuals for HIRSCHMANN GREYHOUND GRM Series

Brands by name

Popular brands

Belden HIRSCHMANN GREYHOUND GRM Series, User Manual

Search results

Summary of Contents for HIRSCHMANN GREYHOUND GRM Series

Reviews:

Related manuals for HIRSCHMANN GREYHOUND GRM Series

Brands by name

Popular brands