Belden HIRSCHMANN BAT450-F, User Manual

Page: 30 / 98

30
Installation BAT450-F
Release 12 07/2020
The socket housing is electrically connected with the device housing.
1.7.3 Pin assignments
1.8 Display elements 11n device variants (non-
LTE)
After the supply voltage is set up, the Software starts and initializes the
device. Afterwards, the device performs a self-test. During this process,
various LEDs light up.
1.8.1 Device state
These LEDs provide information about conditions which affect the operation
of the whole device.
M12 8-pin
(“X”-coded) Pin 10/100 Mbit/s 1000 Mbit/s PoE
(applies to Twisted Pair port) (applies to PoE port)
1 RX+ BI_DB+ Negative V
PSE
2 RX − BI_DB − Negative V
PSE
3 TX+ BI_DA+ Positive V
PSE
4 TX − BI_DA − Positive V
PSE
5 — BI_DC+ Negative V
PSE
6 — BI_DC − Negative V
PSE
7 — BI_DD − Positive V
PSE
8 — BI_DD+ Positive V
PSE
Power
Color
Activity Meaning
green lights up LED lights up after the configuration
red flashing Device has detected at least one hardware error.
green/red Short flashing No password or the default password is set
green/red Long flashing Charge lock active
1 8
2
3 6
7
4 5
Power
WLAN 1 WLAN 2
LS/DA