2
Mounting Instruction
Release 02 06/10
Measuring units
The dimensions are in mm.
The tightening torques are in lb in and Nm.
Indoor mounting
Mount the holder using M4 screws, as shown.
Note:
Use a maximum tightening torque of 17.7 lb in / 2 Nm.
Figure 1: Indoor mounting / Bottom view of the antenna: mounting without sealing
Outdoor mounting and vehicular applications
Important:
The roof of the vehicle should have sufficient mechanical
stability to ensure a correct sealing of the antenna.
Seal the drill holes with the appropriate sealant.
For outdoor overhead mounting, please ensure that the complete
backside of the antenna is weather protected.
Mount the holder using M4 screws, as shown.
Note:
Use a maximum tightening torque of 17.7 lb in / 2 Nm.
Figure 2: Outdoor mounting and vehicular applications / Bottom view of the
antenna: mounting with sealing