Belden Grass Valley VF 7-100X, User Manual

Page: 28 / 37

22
Viewfinder setup
Configuration 2 menu (CONFIG2)
Configuration 2 menu (CONFIG2)
Indicator adjustment submenu (INDADJ)
Button Item Value(s) Description
Menu EXIT CONFIG Exits the configuration 2 menu.
Button1 Text On > Off Turns viewfinder on-screen text on or off.
Note: This is a camera system function.
Button2 Assign Hide > Show Shows or hides the bottom menu/assignment
bar.
Button3 BtnLvl Off , Low, Mid,
High
Selects the brightness level for the viewfinder
menu buttons.
Rotary1 PkCol Whit , Red, Grn,
Blue, Yell, Mgnt,
Cyan, Purp
Selects the color of the viewfinder peaking
signal.
Rotary2 Pk Fine -20 ..50 (00) Adjusts Fine Peaking Control
Rotary3 PREV
↑
NEXT
↓
Selects a menu from the list.
Button Item Value(s) Description
Menu EXIT INDADJ Exits the indicator adjustment menu. Set
indicator levels are stored in memory.
Button1 OSsig Off , Top, Btm Select the position of the On Screen Signalling
indicators (top or bottom) or switch it off.
Button2 — — —
Button3 IndLvl Low, Med ,
High, Cust
Selects the brightness level for the ISO, On-Air
and Call indicators. Low, Med(ium) and High are
fixed brightness levels, when option Cust is
selected, the level can be adjusted using the
rotaries. See below:
Rotary1 ISO 0..99 (99) Adjusts the brightness level of the ISO (yellow)
indicators (both left and right) when IndLvl =
Cust.
Rotary2 OnAir 0..99 (99) Adjusts the brightness level of the On-Air (red)
indicators (both left and right) when IndLvl =
Cust.
Rotary3 Call 0..99 (99) Adjusts the brightness level of the Call (green)
indicators (both left and right) when IndLvl =
Cust.