Belden Grass Valley NV9603, User Manual

Page: 29 / 67

19
NV9603
User’s Guide
Button Types
These are the button types available for NV9603 configurations:
Type Description
Broadcast On the data (machine control) level, the button enables a broadcast take to
an
additional controlled device, after a broadcast route has been initiated
with a “source is master” control-level take to the first controlled device.
The button definition has no fields to configure.
A broadcast button is useful in dubbing applications or when a backup
(redundant) device is in use. See
Broadcast Routes on page 37 .
See also the Source Master button, following.
Category A category button has 3 functions:
• Select a source category and initiate device selection for that category.
• Select a destination category and initiate device selection for that category.
• During the process of device selection, append a suffix to the pending
device name.
A category button can provide any or all of these functions. When you
assign a category button, 3 additional drop-down menus appear:
‘Source Category’, ‘Destination Category’, and ‘Suffix’.
A category button can represent a suffix. Once a category is selected,
operators press suffix buttons to select a device within the category.
Not all category buttons necessarily select categories and not all category
buttons represent suffixes. If your category button does not represent a
suffix, select ‘None’ in the ‘Suffix’ field. If your category button does not
represent a source category, select ‘None’ in the source field. If your
category button does not represent a destination category, select ‘None’ in
the destination field.
Category buttons are affected by source mode and destination mode. Only
source categories are available in source mode; only destination categories
are available in destination mode.
Chop When a chop function is supported by a router, the button is a toggle that
enables and disables rapid switching of the selected destination device
between the current source and the preset source. This chop function is
used to test system timing.
The button definition has no fields to configure.
Clear The button reverts to the most recent preset. You may think of this as a
“backspace key.” During category device selection, it erases the suffixes you
entered under category select in reverse order.
Destination The button selects a destination. The destination name appears in the
‘Destination’ display. The destination is the target of an upcoming take,
which will route a source to that destination.
When you assign a destination button, two drop-down menus appear:
‘Level Set Filter’ and ‘Destination Device’. Select the device for this button
from the list that appears in the ‘Destination Device’ field.
The button is not available in multi-destination mode.