Belden Grass Valley NV9000, User Manual

Page: 28 / 87

18
Configuration
Commitment Buttons
Commitment Buttons
Two buttons at the bottom of the configuration page are self-explanatory and present on
most configuration pages:
• Revert to Saved. Press this button if you want to discard any recent changes you have
made.
• Save. Press this button to commit all your recent changes.
Neither of these actions is reversible.
Panel Options
The panel options section, at the right of the configuration page, has two parts: drop-down
menus and checkbox options. These are the drop-down menus:
The minimum number of destinations for multi-destination mode is 8. If you have the
minimum, there is no need for scrolling during configuration. You may leave some (or all)
MD destinations undefined. Scrolling is disabled unless you have chosen more than 8
destinations as the multi-destination device limit.
These are its drop-down menu options:
Panel Type XY / Multidest
Modes Panel can be used in either XY or multidest modes. If this
option is chosen, place an XY/MD button on the panel.
Multidest Only Locks the panel in multidest mode. XY mode cannot be
accessed.
XY Only Locks panel in XY mode. Multidest mode cannot be
accessed.
Preset Monitor None The preset source video is not sent to a monitor.
‹device› The preset source video for the selected destination appears
on the specified monitor (device).
Status Monitor None The current source video is not sent to a monitor.
‹device› The current source video for the selected destination
appears on the specified monitor (device).