GUIDE TO INSTALLATION AND OPERATION
MDX-3901 |
31
5.9 Factory/Presets panel
5.9.1 Factory/Presets tab
Factory Section
Load Factory
: Clicking this button will restore the card to a
factory default state. Two checkboxes enable the user to
choose whether to include Parameters and/or Alarms in the
restoration process.
The Input selection and the mode (Embedder/De-
Embedder) are not part of a factory reset.
Note that User Presets are not changed
User Presets section
The MDX-3901 has memory registers which can hold up to
5 user-defined parameter settings.
The
Current Preset
box (at the bottom left corner of the
panel) displays the last loaded preset. Any change to the
card configuration after a preset is loaded will change the
display to "Custom" instead of the preset value.
Select
any one of the five presets using the pull-down list.
The name of the currently-selected User Preset is shown
on the pulldown box.
Click
Load
to load the contents of the selected User Preset
into the MDX-3901. All parameter settings and values will
be replaced by the contents of the selected User Preset.
Click
Save
to store the current parameter settings and values from the MDX-3901 into the selected User Preset. The
existing contents of the preset will be overwritten.
Profiles
This section provides the option to save and recover the entire card configuration (including user presets if desired) on
an external disk, or to copy it to another MDX-3901 card.
Click on
Profiles
to open the Profile Copy window.
Figure 5.19 Factory/Presets panel
