Belden Grass Valley LUMO, User Manual

Page: 33 / 71

19
LUMO-CPU-ETH Controller Card
Chapter 4 describes the installation and functionality of the LUMO-CPU-ETH Controller card in
the LUMO housing frame.
Topics
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19
Control Interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Using the LUMO-CPU-ETH web page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
IP Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20
Resetting the Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 23
Using the iControl interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 24
Card-Front Status LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25
Configuring the LUMO-CPU-ETH Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 25
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 36
Overview
The LUMO-CPU-ETH Controller installed in the LUMO frame supports all on-frame communica-
tion between cards, and incorporates a web page for local control and adjustment of the frame.
The LUMO-CPU-ETH Controller serves as the communications port for control and alarm infor-
mation entering and leaving the frame. The LUMO-CPU-ETH controller features two Ethernet
ports for system-wide monitoring and control of the frame, using Miranda’s control solutions or
a third party monitoring system. This controller card is compatible with the TCP/IP protocol and
can support polling or report on error modes (unsolicited messaging).
Features
•
Dual Ethernet RJ-45 ports (10/100Base-T) with static IP address configuration - same address
for both ports, which are configured for active backup redundancy.
• Provides ultra-robust Ethernet connectivity for LAN/WAN
• Controls up to 9 LUMO cards of any type
• Linux-based operating system for robust, mission-critical operations
• Features web page for local configuration of the controller and frame
• Can be remotely configured via iControl
• Provides card and frame health monitoring and status reporting
• Provides extensive frame monitoring: