79
KMV-3901/KMV-3911
Installation & Service Manual
Network Settings Panel
The KMV-3901/3911 is shipped with default network settings, which will not work for your
network and must be changed. You may need to consult your network administrator to get
the correct values. Enter the appropriate IP address, mask and gateway information to
configure this KMV-3901/3911 within your Ethernet network.
Click
Apply
to set these values into the card, or
Cancel
to leave the original values
unchanged.
Notes
• These settings apply to the rear-panel Ethernet port of the KMV-3901/3911
itself;
not
to the Ethernet ports at the back of the Densité controller card.
• The MAC Address is a hard-wired attribute of the KMV-3901/3911 card, and
is not configurable; the information is presented here for information only.
