15
K-FRAME
Release Notes
Confirm System Operation
1 Verify that all the installed MEs are operational. Select different crosspoints on the
Control Panel and fly a key with an iDPM.
2 Ensure that any software enabled options operate correctly. Existing authorization
codes should work with the new software.
3 Check that EMEMs run properly:
• Older effects should work with the new software. If there are differences, however, you
will need to edit or rebuild the effect with the new software version.
• If older effects use iDPMs, it may require that you load, update, and save the show (see
the
K-Frame User Manual
for more information).
4 Reload the Macros and check that they operate correctly.
5 Load some Image Store images and confirm they display correctly.
Back up New Configuration and Effects Files
1 When you are satisfied with system operation, save the new configuration files and
effects as a Show file to a folder you’ve created on that version’s K-Frame Software USB
stick.
2 Label the media with the version and date and store it in a safe place.
3 Reactivate any virus protection on the Menu panel that may have been disabled at the
start of this procedure.
