Belden Grass Valley IPVU Installation Manual Download Page 85

Page: 85 / 98

IPVU

Installation Guide

3 Click the

Import Upgrade Package

button.

Fig. 5-4: Select Upgrade Package

4 Browse to the folder containing the upgrade package.

5 Select the upgrade package and click OK.

When the package has been imported, it is added to the list of available upgrades, and
units may be upgraded accordingly. See

To install the upgrade on the IPVU

, on page 85.

To install the upgrade on the IPVU

A unit can only be upgraded if an appropriate upgrade package is available. See

add/import the upgrade package to RollCall Control Panel

, on page 84.

1 Right-click on the unit name in the Network Browser.

The unit menu displays.

Fig. 5-5: IPVU Menu

Summary of Contents for Grass Valley IPVU



































































































Search results

Summary of Contents for Grass Valley IPVU

Reviews:

Related manuals for Grass Valley IPVU

Brands by name

Popular brands

Belden Grass Valley IPVU, Installation Manual

Search results

Summary of Contents for Grass Valley IPVU

Reviews:

Related manuals for Grass Valley IPVU

Brands by name

Popular brands