GUIDE TO INSTALLATION AND OPERATION
10
| HDA-3961
[SELECT] Gives access to the next menu level. When a parameter value is shown, pushing this button once
enables modification of the value using the [+] and [
–] buttons; a second push confirms the new value
[ESC]
Cancels the effect of parameter value changes that have not been confirmed; pushing [ESC] causes the
parameter to revert to its former value.
Pushing [ESC] moves the user back up to the previous menu level. At the main menu, [ESC] does
not
exit the menu system. To exit, re-push the [SELECT] button for the card being controlled.
Notes:
1. If you do not touch any buttons on the local control panel, the controller will revert to its normal
standby mode after 30 seconds.
2. If you changed a parameter from the control menu, but have not applied your change (you did not
touch the SEL button on the control panel), once the 30-second timeout has occurred, the
parameters will be confirmed as if you had touched the SEL button
5
Remote Control Using iControl
The operation of the HDA-3961 may be controlled using Grass Valley
’s iControl system.
This manual describes the control panels associated with the HDA-3961 and their use.
Please consult the iControl User’s Guide for information about setting up and operating iControl.
In iControl Navigator or iControl Websites, double-click on the HDA-3961 icon to open the control panel.
5.1 The iControl Graphic Interface Window
The basic window structure for the HDA-3961 is shown in figure 3.2. The window identification line gives the card type
(
HDA-3961
) and the slot number where the card is installed in its Densité frame.
Figure 3.2 HDA-3961 iControl graphic interface window:
1
2
3
