GUIDE TO INSTALLATION AND OPERATION
FIO-1901-R |
13
3.3.4 The Factory/Presets panel
Click the
Load Factory
button to reset all parameters on this
FIO-1901-R card to factory default values.
•
The factory default values are shown underlined in the
menu found in the Annex to this document, beginning
on page 19.
User Presets
The FIO-1901-R has memory registers which can hold up to
5 user-defined parameter settings.
Select
any one of the five presets using the pull-down list.
The name of the currently-selected User Preset is shown on
the name bar.
Click
Load
to load the contents of the selected User Preset
into the FIO-1901-R. All parameter settings and values will
be replaced by the contents of the selected User Preset.
Click
Save
to store the current parameter settings and
values from the FIO-1901-R into the selected User Preset.
The existing contents of the preset will be overwritten
without asking for confirmation.
3.3.5 The Alarm Config panel
This panel allows the alarm
reporting of the FIO-1901-R
to be configured.
Click on the
Alarm Config
button to open the Alarm
Configuration window.
The Alarm Configuration
window is organized in
columns
Status/Name
This contains an
expandable tree listing all
the alarms reported by this
FIO-1901-R card.
•
Each alarm name
includes an icon that
shows its current
status
Figure 3-6 Factory / Presets panel
Figure 3-7 Alarm Configuration window
