GUIDE TO INSTALLATION AND OPERATION
FIO-1901-R |
19
ANNEX 1 – FIO-1901-R User Interface (local menu structure)
STATUS
NO REAR, FIO-1901-RR-SRP, FIO-1901-TT-SRP, FIO-1901-RT-SRP, FIO-1901-R-SFP, FIO-1901-T-SRP
REAR MISMATCH
OPT.Rx
NO LOCK, NO SIGNAL, 270 Mbps, 1.5 Gbps, 3 Gbps
ELE.IN
NO LOCK, NO SIGNAL, 270 Mbps, 1.5 Gbps, 3 Gbps
NO SFP, SFP-RR-LC, SFP-TT-S13S13-LC, SFP-RT-S13-LC, SFP-R-LC, SFP-T-S13-LC,
SFP-RR-W-LC,SFP-TT-C27C29-LC, SFP-TT-C31C33-LC, SFP-TT-C35C37-LC, SFP-TT-C39C41-LC,
SFP-TT-C43C45-LC, SFP-TT-C47C49-LC, SFP-TT-C51C53-LC, SFP-TT-C55C57-LC,
SFP-TT-C59C61-LC, SFP-TT-W13W15-LC
SFP MISMATCH
SFP VENDOR NAME (e.g.: GENNUM, OE ELECTRONICS,…)
SFP PART NUMBER (e.g. GO2921)
SFP REVISION
SFP TEMPERATURE (e.g.: [TEMP: LOW, NORMAL, HIGH])
SFP RECEIVE POWER, (e.g.: Rx PWR: -15dBm, LOW, HIGH)
RECLOCKER
OPTICAL Rx
[ON, BYPASS]
USER PRESET
LOAD
[USER 1, USER 2, USER 3, USER 4, USER 5]
SAVE
[USER 1, USER 2, USER 3, USER 4, USER 5]
CONFIG ALARMS
OPT.Rx NO LOCK
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
OPT.Rx NO SIGNAL
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
OPT.Rx PWR WARN
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
OPT.Rx PWR ERR.
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
SFP TEMPERATURE
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
R./SFP MISMATCH
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
NO SFP
ALARM LEVEL
[GREEN, YELLOW, RED, FLASH RED]
ALARM REPORT
[NONE, GPI]
VERSION
FIO-19R: XXX
CPU BUILD: YYY
FACTORY DEFAULT
RESTORE
Only if matched SFP present
This item does not appear if the rear is matched to the card type
This item does not appear if the SFP is matched to the card type and rear
