Belden Grass Valley CopperHead 3404, User Manual

Page: 10 / 113

4
About CopperHead 3404
Unpacking the CopperHead 3404 Transceiver System
Unpacking the CopperHead 3404 Transceiver System
The following table lists the various items shipped with a system depending on the
particular configuration.
Individual items shipped with a CopperHead 3404 system depend on the particular
configuration.
Please consult your packing slip and purchase order to ensure that you have received all of
the expected components. Inspect all components for scratches and other mechanical
damage, and inspect the electrical connectors for bent or damaged pins and latches.
Report any missing or damaged components to Grass Valley. See
Product Returns on
page 5.
You must use your own video and audio cables to make connections for Video, Tally, Black
Burst/Genlock, Base Station monitor, intercom, and other ancillary signals and equipment.
Suggestions for these cables are discussed later in this User Guide.
Leave the protective caps on the optical connectors whenever the fiber is disconnected.
CopperHead System Type
Description Part Code
Tactical Fiber (local
power at camera)
Hybrid Fiber -
Standard Power
(Power Wafer) Hybrid Fiber -
High Power
(PowerPlus)
CopperHead Camera Unit CHG3-CAM
  
CopperHead Base Station CHG3-BS
  
AC-to-DC Power Supply ADAP-AC

No No
Panel-Mountable Fiber
Extension CH3BFC
 
No
Camera Remote cable CHCR
  
Camera Signal cable CH3CS
  
Base Station Remote cable CHBR
  
Power Wafer w/jumper cable CHG3-PW No

No
Eternal Power Wafer Supply CH3-MPS No

No
PowerPlus PWRPLS No No

HDX Power Supply HDX No No

Fiber jumper(s) various No No

Reel or coil of Tactical Fiber CA

No No
Reel or coil of Hybrid Fiber CA No
 
Operations Manual CA
  

Standard

Optional