Belden 934 879-009 Manual Download Page 40

Page: 40 / 98

5.4 Configuration of the LioN-P

EtherNet/IP modules

5 Configuration and startup

Link

Connection type

Diagnostics Assembly ID

Length

Output: 192

0 byte

Input: 101

6 byte

8-bit in/out + diagnostic Listen Only

Yes

Configuration: n/a

0 byte

Output: 192

0 byte

Input: 102

3 byte

8-bit in/out

Listen Only

Configuration: n/a

0 byte

5.4.2 Configuration parameters

To transfer the configuration parameters, LioN-P uses different assembly

objects depending on the module type. These can be seen in section

Connections and assembly objects

on page 28.

Each LioN-P module has a fixed number of configuration parameters. This

variable is determined by the respective configuration assembly instance.
Length of the configuration parameters:

16DIO: 65/33 words (130/66 bytes) depending on the selected profile

16DI: 1 word (2 bytes)

16DO: 33 words (66 bytes)

8DI/8DO: 17 words (34 bytes)

The configuration parameters Surveillance Timeout (delay of the output

monitoring time of a channel) and Fail Safe (initial state of a channel in the

event of an error) are only available for LioN-P modules and 16DIO profiles

with output functionality (16DIO, 16DO, 8DI/8DO).
The configuration parameters Process Data Direction and IO-Mapping (bit

assignment of the channels) are only available for LioN-P 16DIO modules.

5.4.2.1 Surveillance Timeout Configuration (ms)

These parameters are provided to all module types with digital outputs. The

configuration can be used to set a delay time (Surveillance Timeout) that

Manual LioN-P EtherNet/IP

Version 2.0 11/2017

Summary of Contents for 934 879-009



































































































Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands

Belden 934 879-009, Manual

Search results

Summary of Contents for 934 879-009

Reviews:

Related manuals for 934 879-009

Brands by name

Popular brands