Belden 1RU32LCD-BK-K User Manual Download Page 160

Page: 160 / 269

138

RollCall Templates

TAKE Configuration Template

TAKE Configuration Template

This template is available in all panel modes.

More than one

Take

button may be defined on this template. They can be configured to

route (i.e. to ‘Take’ ) on all or some router levels, or on all or some audio tracks
(TrackRouting).

The

Take

buttons defined here are mapped to all

Take

buttons that appear on the panel,

from left-to-right, top-to-bottom.

Fig. 5-60: TAKE Configuration Template

Note:

The ability to configure levels and tracks depends on the router
controller and the connected router(s).



Router connection node 0000:81:00 is required.

Tab. 5-41: TAKE Setup Items

Setup Item

Description

Routing Type

Selection box.
Defines the type of routing to be configured. Select the
type:

Association
(Levels)

• Routing selectable on a routing level-by-level basis.

Track Routing

• Routing selectable on a video and audio track basis.

Summary of defined

Take

buttons

Summary of Contents for 1RU32LCD-BK-K














































































































































































































































































Search results

Summary of Contents for 1RU32LCD-BK-K

Reviews:

Related manuals for 1RU32LCD-BK-K

Brands by name

Popular brands

Belden 1RU32LCD-BK-K, User Manual

Search results

Summary of Contents for 1RU32LCD-BK-K

Reviews:

Related manuals for 1RU32LCD-BK-K

Brands by name

Popular brands