Belanger Top Wheel Mix & Match, Owner'S Manual

Page: 57 / 80

TOP WHEEL
Mix and Match
1MANUL749
Belanger, Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681
53
Maintenance
General Repairs
Torque Plate and Electric Motor Replacement
Remove Motor Gearbox assembly
8) Remove torque stud retainer pins and washers. This will allow the motor gearbox assembly
to be removed by pulling the assembly straight up and off the torque studs and off the wheel
shaft.
Move the motor gearbox assembly to a work surface and turn it over to expose the bottom of
the cover and the cover mounting plate if so equipped. You will need a work surface such as
a table or a bench available to allow for disassembly of the gearbox torque plate.
If the assembly does not have a cover proceed to step 10
9) The cover base can be removed by removing the three fasteners on the cover mount plate.
Once the cover mount and cover are removed it will allow access to the bottom of the
gearbox torque plate assembly.
10) Using a 5 mm Allen wrench; remove the four fasteners to separate the torque plate and
mounting ring from the gearbox to expose the mounting holes on the gearbox.