Belair W-01S Assembly Instructions Download Page 2

Page: 2 / 3

W-01S

STEP 1

Connect desk top A and right gable B

as shown. Fasten pins and cams.

STEP 2

Lay back D flat and lower top and gable

onto back. Do not fasten pins and cams

until next step.

STEP 3

Attach left gable C . Fasten all pins and

cams and lift unit right side up.

Summary of Contents for W-01S

Page 1: ...t Use hardware provided and tools recommended to avoid any product faults Always assemble product on a clean soft surface to avoid scratching PARTS INCLUDED HARDWARE INCLUDED TOOLS REQUIRED 22X 22X 20X 4X 1X 2 Phillips screwdriver 2 Robertson ASSEMBLY INSTRUCTIONS A B C D E F G ...

Page 2: ...and right gable B as shown Fasten pins and cams STEP 2 Lay back D flat and lower top and gable onto back Do not fasten pins and cams until next step STEP 3 Attach left gable C Fasten all pins and cams and lift unit right side up A B C D ...

Page 3: ... and cams STEP 5 Assemble waterfall top F and back G as shown Fasten pins and cams STEP 6 Position waterfall on center of transaction top Secure waterfall with screws through back of unit as shown Use cover caps to cover any visible cams and screws G F E ...