Belair W-01S Assembly Instructions Download Page 1

Page: 1 / 3

W-01S

DISCLAIMER

• Two people are recommended for the assembly of this product.

• Use hardware provided and tools recommended to avoid any product faults.

• Always assemble product on a clean soft surface to avoid scratching.

PARTS INCLUDED

HARDWARE INCLUDED

TOOLS REQUIRED

22X

20X

#2 Phillips screwdriver

#2 Robertson

ASSEMBLY INSTRUCTIONS

Summary of Contents for W-01S

Page 1: ...t Use hardware provided and tools recommended to avoid any product faults Always assemble product on a clean soft surface to avoid scratching PARTS INCLUDED HARDWARE INCLUDED TOOLS REQUIRED 22X 22X 20X 4X 1X 2 Phillips screwdriver 2 Robertson ASSEMBLY INSTRUCTIONS A B C D E F G ...

Page 2: ...and right gable B as shown Fasten pins and cams STEP 2 Lay back D flat and lower top and gable onto back Do not fasten pins and cams until next step STEP 3 Attach left gable C Fasten all pins and cams and lift unit right side up A B C D ...

Page 3: ... and cams STEP 5 Assemble waterfall top F and back G as shown Fasten pins and cams STEP 6 Position waterfall on center of transaction top Secure waterfall with screws through back of unit as shown Use cover caps to cover any visible cams and screws G F E ...