Belair HF645-6 User Manual Download Page 2

1

High temperature protection

Safety

Dear customer,

You will have many years of cooking enjoyment with your new cooktop.

 

Please read this manual carefully and keep in a safe place for future reference.

 

Please pay particular attention to the Safety and Maintenance section on page 8.

 

 

 

 

 

 

The installation and connection of the cooktop must only be carried out by 

qualified personnel.

Repairs to the cooktop are only to be carried out by approved service persons.  

Repairs carried out by inexperienced persons may cause injury or malfunctioning.  

If your appliance needs repair contact your service centre.

 

Flush-mounted appliances may only be operated following installation in suitable 

cabinets and workplaces which conform to the relevant standards. This ensures 

sufficient protection against electric shock as required by certification body.

 

 

If your cooktop malfunctions or fractures switch off all cooking zones and contact 
your service centre.

 

 

 

If the surface is cracked, switch off the appliance to avoid the possibility of electric

shock.  Do not re-use your cooktop until the glass surface has been changed.

 

 

 

When using the cooktop, never use aluminium foil, products wrapped in aluminium 

foil or deep frozen food in aluminium cookware.

 

If the supply cord is damaged, it must be replaced by the manufacturer, its service 

agent or similarly qualified persons in order to avoid a hazard.

 

 

 

 

WARNING:  Accessible parts may become hot during use.  Young children should 

be kept away.

This appliance is not intended for use by young children or infirm persons unless 

they have been adequately supervised by a responsible person to ensure that 
they can use the appliance safely.  Young children should be supervised to 

ensure that they do not play with the appliance.

 

 

The cooking zones will become hot when you cook.  Always keep small children 

away from the appliance.

 

 

 

This appliance is not intended for use by persons (including children) with 

reduced physical, sensory or mental capabilities, or lack of experience and 
knowledge, unless they have been given supervision or instruction concerning 

use of the appliance by a person responsible for their safety.

A sensor mounted inside the cooker will detect any excessive heat and the 
cooking surface power will be disconnected.

 

 

 

 

Summary of Contents for HF645-6











Reviews: