BelAir20 Quick Install Guide
Introduction
Introduction
The BelAir20 is a Wi-Fi access point that meets IEEE 802.11n draft 2.0
standards. It is fully interoperable with older 802.11a/b/g standards, providing a
transparent, wireless high speed data communication between the wired LAN
and fixed or mobile devices. The unit includes three detachable dual-band
2.4/5 GHz antennas with the option to attach higher specification external
antennas that boost network coverage. A power adapter and all required
mounting hardware is also included.
Package Contents
The BelAir20 package includes:
# BelAir20 dual radio access point
# Power adapter-input: 100-240 VAC; output: 48 VDC
# Four stick-on rubber feet
# BelAir20 wall or ceiling mounting bracket
# Four M3.5x40 pan head Phillips screws for wall mounting
# Four 6x35 nylon wall mount anchors
# Two tie wraps to secure DC power and Ethernet cables
# One 10-32 nut and #10 lock washer for ground stud
# Two twist-on T-rail support clips and T-rail spacers
# Quick Installation Guide
Inform your dealer if there are any incorrect, missing or damaged parts. If
possible, retain the carton, including the original packing materials. Use them
again to repack the product in case there is a need to return it.
January 7, 2009 Confidential Page
4
of
5
Document Number BDTQ02001-A01 Standard
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil num
é
rique de la classe B conforme
á
la norme NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p) is not more than that permitted for successful communication.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is still responsible for
the IC compliance requirement of the end product, which integrates this module.
20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module
is integrated into. Under such configuration, the IC RSS-102 radiation exposure limits set forth for an population/
uncontrolled environment can be satisfied.
Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate
this equipment.
USERS MANUAL OF THE END PRODUCT: In the users manual of the end product, the end user has to be
informed to keep at least 20cm separation with the antenna while this end product is installed and operated. The end
user has to be informed that the IC radio-frequency exposure guidelines for an uncontrolled environment can be
satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment. IC statement is required to be available in
the users manual: This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.
LABEL OF THE END PRODUCT: The final end product must be labeled in a visible area with the following "
Contains TX IC : 4674A-20180001 ".
IMPORTANT NOTE:
IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
