Installing the switch housing
1. Plug in the light wires from fan and the
light wires from light fixture (see FIG.
8).
2. Plug the halogen bulb into the sockets.
Do not touch the glass bulb with your
fingers. It is extremely important that
the glass be clean. If it is touched, or
dirty, clean carefully with a tissue. A
dirty glass bulb will cause the bulb to
fail almost immediately (see FIG 9).
3. Position the indentations in the outer
rim of the glass shade so that they line
up with the tabs on the inside surface
of the fan light fixture rim. Carefully
lift the glass shade up inside the light
fixture as far as it will go. Rotate the
shade in a clockwise direction until it
is held tightly in place by the three tabs
(see FIG 10).
Fan Airflow Direction
1. Slide the reverse switch to right or left
to obtain opposite direction of airflow
(see FIG 11).
SOCKET
BLUB
TAB
FIG.9
FIG.8
COUPUING
REVERSE
SWITCH
FIG.11
FIG.10
FAN
INDENTATION
GLASS
LIGHT
FIXTURE
PLUG
SCREW
