5
Set-up mode.
In this mode The LCD display will indicate the set-up conditions. See set-up details below.
Nudge switches.
When the LCD shows the default screen (above) these switches, when depressed, will
increase or decrease the separation setting.
When the LCD shows set-up information the value indicated can be increased or decreased
by using these switches.
Left mono source switch.
This switch allows the left mono input channel to be used as the source of the synthesized
stereo. When this switch is activated the LDC will show an ‘
L
’ and the left LED will be illuminated.
Right mono source switch.
This switch allows the right mono input channel to be used as the source of the synthesized
stereo. When this switch is activated the LDC will show an ‘
R
’ and the right LED will be illuminated
Synth mode switch.
Depressing this switch will activate the stereo synthesizer. This switch will be overridden by
any GPI inputs. The change from normal to stereo synthesizer mode is carried out by a smooth cross
fade over 100 milliseconds. When this switch (or GPI 1) is activated the LCD will show
SYNTH
STEREO
and the synth LED will be illuminated.
Bypass switch.
Depressing this switch (or GPI 2) will de-activate the stereo synthesizer and activate the
straight through mode. The LCD will show
NORMAL
and the synth LED will be extinguished. The
change from synth to normal mode is carried out by a smooth cross fade over 1100 milliseconds.
Lock switch.
Depressing this switch will lock the keyboard and the LCD will show
keys locked
.
This will prevent inadvertent operation of the keys. The keyboard can be activated by depressing and
holding the lock key for 5 seconds.
