bel Digital Audio 2120B, User Manual, Page: 30 / 34

BEL DIGITAL AUDIO BEL 2000 Series Remote Controller

2004 BEL Digital Audio Ltd.
7
Cross point switches
These switches allow inputs to be connected to outputs in the matrix (quad or
dual) mode. In the mix mode they double as program number selectors the switches
are arranged in columns. This facility facilitates convenient setup changes.
Fader In/Out
This switch is only functional in the Mix mode and is used to select which of
the four outputs is currently to be adjusted.
Mute
These switches will allow the corresponding output to be muted.
Faders
These are motorized faders that are initially driven to a required setting. They
can then be used to adjust input or, in mix or dual mode, output levels. They can
adjust the levels by imposing a gain ranging from +10 to –30 dB on them. Setting a
fader to less than –30 dB will mute that signal.
Menu select
The target processor setup can be adjusted using the setup mode on the remote
controller. Pressing the centre of the rotary encoder enters this mode. The LCD will
display the model number of the currently connected target processor. A list of setup
parameters is also displayed and rotating the encoder can access these. When the
required parameter is within the box on the display a second press of the encoder
causes the current value of that parameter to be displayed in inverse video; the value
can then be adjusted by rotating the encoder. Pressing the encoder again will return to
the parameter select mode and the changed value will be downloaded to the target.
Alternatively pressing any other switch will drop out of the setup mode. If EXIT is
selected the setup mode is quit when the encoder is pressed. The manual describing
the setup functions for the target processor should be consulted for the details of the
setup parameters.
Note.
The remote controller can adjust parameters of the target processor that cannot
be accessed via the target’s own front panel. So it is recommended that if a processor
(2120,2140) has been connected to a remote controller and is then to be used entirely
stand alone that a power on reset be performed on the processor to reset these
parameters.