Page 4
SET 80
Owner's Manual
Unpacking
Unpacking
Each box containing your
SET 80
contains the
following parts:
1 -
SET 80
User's Guide
1 - Power Cable for connection to utility
power [6' 7" - 2 meters long]
1 -
SET 80
audio power amplifier
2 - 845 power triodes in a protective box,
these tubes may be shipped in a separate
shipping container.
1 - Bel Canto Owner's Warranty &
Registration Card
Carefully unpack each piece and check for
shipping damage. If there is any damage,
please contact your dealer or Bel Canto Design,
Ltd.
Save
all packing materials as the packing is
specially designed to protect the amplifier during
shipping or transporting. If you lose or damage
the packing materials or carton, please contact
your dealer or distributor before attempting to
transport the amplifiers.
The SET 80 power supply is preset for the
proper national voltages before you
receive it. The power cable will have the
correct plug for your local power system.
If you believe this is not true, please
contact your dealer immediately. Do not
attempt to alter or change power settings
yourself!
Warning
Do not connect power to this amplifier yet!
This power amplifier, like any electrical component, can be dangerous and cause injury unless
correct handling procedures are observed and used. Before powering this power amplifier it is
necessary to read and follow proper procedures concerning its setup and use.
Do not open up your SET 80 (do not remove the chassis covers). There are no user serviceable
parts inside. Any tampering of internal parts will immediately void your warranty.
Complete and mail the Owner's Registration Card immediately in order to activate your warranty.
!
