32 / EN
Washing Machine / User’s Manual
Canceling the Delayed Start function
If you want to cancel the delayed start countdown and start the programme immediately:
1. Set the Delayed Start period to zero or turn the Programme Selection knob to any
programme. Thus, Delayed Start function will be canceled. The End/Cancel light flashes
continuously.
2. Then, select the programme you want to run again.
3. Press Start / Pause button to start the programme.
4.6.12 Starting the programme
1. Press Start / Pause button to start the programme.
2. Programme follow-up light showing the startup of the programme will turn on.
C
If no programme is started or no button is pressed within 1 minute during programme
selection process, the machine will switch to Pause mode and the illumination level of the
temperature, speed and loading door indicator lights will decrease. Other indicator lights
and indicators will turn off. Once the Programme Selection knob is rotated or any button is
pressed, indicator lights and indicators will turn on again.
4.6.13 Progress of programme
Progress of a running programme can be followed from the Programme Follow-up
indicator. At the beginning of every programme step, the relevant indicator light will turn
on and light of the completed step will turn off.
You can change the auxiliary functions, speed and temperature settings without stopping
the programme flow while the programme is running. To do this, the change you are
going to make must be in a step after the running programme step. If the change is not
compatible, relevant lights will flash for 3 times.
C
If the machine does not pass to the spinning step, Rinse Hold function might be active or
the automatic unbalanced load detection system might be activated due to the unbalanced
distribution of the laundry in the machine.
4.6.14 Loading door lock
There is a locking system on the loading door of the machine that prevents opening of the
loading door in cases when the water level is unsuitable.
Loading door light will start flashing when the machine is switched to Pause mode.
Machine checks the level of the water inside. If the level is suitable, Loading Door light
illuminates steadily within 1-2 minutes and the loading door can be opened.
If the level is unsuitable, Loading Door light turns off and the loading door cannot be
opened. If you are obliged to open the Loading Door while the Loading Door light is off, you
must cancel the current programme. See. "Cancelling the programme"
