15 / EN
Washing Machine / User’s Manual
C
If the programme has not reached the spinning step, you can change the speed without
switching the machine to Pause mode.
4.9. Delayed Start
With the Delayed Start function the end of the programme may be delayed up to 3, 6 or 9
hours.
C
If the programme has not reached the spinning step, you can change the speed without
switching the machine to Pause mode.
1.Open the loading door, place the laundry and put detergent, etc.
2.Select a washing programme and spin speed.
3.Set the desired time by pressing the Delayed Start button. When the button is pressed once,
3 hours delayed end is selected. When the same button is pressed again, 6 hours delay is
selected, and when it is pressed for the third time, 9 hours delayed end is selected. If you
press the Delayed Start button once again, Delayed End function will be canceled.
4.Press Start / Pause button. Previous delayed end time light turns off and next delayed end
time light turns on after every 3 hours.
5.At the end of the countdown, all delayed end lights will turn off and the selected programme
will start.
C
You can switch the machine to pause mode and add laundry during the delayed end period.
Changing the delayed end period
If you want to change the time during countdown, you will need to cancel the programme and
set the delay time again.
Canceling the Delayed End function
If you want to cancel the delayed end countdown and start the programme immediately:
1.Turn the Programme Selection knob to any programme. Thus, Delayed End function will be
canceled. The End/Cancel light flashes continuously.
2.Then, select the programme you want to run again.
3.Press Start / Pause button to start the programme.
4.10. Starting the programme
1.Press Start / Pause button to start the programme.
2.Programme follow-up light showing the startup of the programme will turn on.
4.11. Child Lock
Use Child Lock function to prevent children from tampering with the machine. Thus you can
avoid any changes in a running programme.
C
If the Programme Selection knob is rotated when the child lock is active, "Child Lock Enabled
LED" will flash 3 times. The Child Lock does not allow any change in the programmes or the
selected speed.
Even if another programme is selected with the Programme Selection knob while the Child Lock
is active, previously selected programme will continue running.
When the Child Lock is active and the machine is running, you can switch the machine to Pause
mode without deactivating the Child Lock by turning the Programme Selection knob to On / Off
position. When you turn the Programme Selection knob afterwards, the programme will resume.
To activate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds. While you are holding for
3 seconds, the «Child Lock Enabled LED» will flash. You can release the buttons when the
LEDs become permanently on.
To deactivate the Child Lock:
Press and hold Speed and Delayed Start buttons for 3 seconds while any programme is
running. While you are holding for 3 seconds, the «Child Lock Enabled LED» will flash. You
can release the buttons when the LED turns off completely.
Summary of Contents for WRE6511WBD
Page 2: ......
