to the State of California to cause
cancer, birth defects, or other
reproductive harm, and requires
businesses to warn of potential
exposure to such substances. This
appliance can cause low-level ex-
posure to some of the substances
listed, including benzene, form-
aldehyde, carbon monoxide, and
toluene.
• All electric wall ovens must be
hard wired (direct wired) into an
approved junction box. A plug and
receptacle is not permitted for this
application. Do not shorten the
flexible conduit. The conduit strain
relief clamp must be securely at-
tached to the clamp. If the flexible
conduit will not fit within the clamp,
do not install the oven until a clamp
of the proper size is obtained.
Junction box may be located in
adjacent cabinet.
6.4 INSTALLATION
CONDITIONS
• All dimensions given in this manual
are in inches and millimeters.
• Oven dimensions and cutout di-
mensions are given in the previous
sections.
• Use cutout dimensions appropriate
for type of cabinet used in installa-
tion.
• Ensure cutout dimensions are ac-
curate for the type of cabinet and
appliance.
• All cabinet construction should be
complete and any dust or debris re-
moved before installing appliance.
• The cabinet shelf the appliance
will be installed on should be able
to withstand the weight of 220 lbs
(100 kg) or more.
• A shelf must be installed between
the oven and any drawer directly
under the oven.
• Use safety gloves before carry the
oven.
6.5 INSTALLATION
1. Open oven door and unlock
hinge clamps.
1
INSTALLATION
17
